Ä¢¹½Ö±²¥

Nanowire lawns make for sheets of image sensors

An imaging sensor made from a mixed crop of nanowires could one day be printed onto sticky tape, and be self-powered and wireless
This image of a spot of light was taken using a new image sensor made by growing lawns of nanowires. The approach should make it easy to create meters squared of flexible image sensors
This image of a spot of light was taken using a new image sensor made by growing lawns of nanowires. The approach should make it easy to create meters squared of flexible image sensors
(Image: PNAS)

Growing a mixed “lawn� of two kinds of nanowires can make a new kind of light-sensing array that could be made in metre-scale sheets. The researchers behind the prototype say such cheap, high-quality image sensors would allow uses not conceivable using today’s more expensive technology.

Current sensors, such as those found in digital cameras, are made like any other silicon chip – they are carved out from a block of material. The new nanowire sensors are instead built from the bottom up, using chemically-grown nano-sized components.

A research team led by , at the University of California, Berkeley, developed the process. They start by growing an unruly “lawn� of nanowires on a surface.

Brush up

The crop is then printed onto another surface, a step that simultaneously tidies them up.

“At the first stage, the nanowires are more-or-less standing up, like a bad hair day. But during the printing process, they effectively get combed,� says Javey.

The nanowires, which are a few tenths of a millimetre long and a few tens of nanometres wide, can be printed onto anything from silicon to plastic or paper. Whatever the surface, it must be prepared with a pattern that guides the nanowires to predetermined locations.

To make the functioning sensor, two different “crops� of nanotubes are printed onto the same surface. Cadmium selenide nanowires produce electric charge when hit by light, while those made from silicon-coated germanium act as transistors to amplify that charge.

Proof of concept

The team built a prototype sensor with 260 pixels, each made from up to 5 sensor nanowires for each transistor nanowire. In tests, 80% of the sensor circuits worked as desired (see image, right). “It’s the largest integrated device to date based on nanowires,� Javey says.

Javey says the arrays are reliable, flexible and easy to scale up. He envisions growing self-powered, wireless versions on rolls of tape several metres in diameter.

“Imagine having a tape – just like your sticky tape – that you can grab and put on anywhere you want,� he says. “This tape will have all the needed components to do the active sensing, translate the data, and transmit it wirelessly.�

Producing image sensors in large, cheap areas could encourage new uses for imaging to emerge, says Javey. His team is working on the extra parts needed: nano-scale batteries for power and equally small wireless components.

“Outstanding application�

Javey and colleagues are among the very first to successfully demonstrate that different kinds of nanowires can be brought together to make integrated sensor circuitry, says , a specialist in organic electronics at the University of Illinois at Urbana-Champaign. “I really like what they have done here,â€� he told New Ä¢¹½Ö±²¥.

, who leads a nanotechnology group at Georgia Institute of Technology, Atlanta, Georgia, added: “It demonstrates an outstanding application of nanowires in integrated electronics.�

Journal reference: ,

Nanotechnology – Follow the emergence of a new technology in our continuously updated .

Topics: Nanotechnology